Dimmer Switch + LED Driver 2-in-1 | 12V & 24V | UL Listed

πŸ”† All-In-One Dimming Solution

One Switch Does It All β€” Driver & Dimmer Built In

Replace your separate driver and dimmer with a single elegant wall switch. UL Listed, flicker-free, whisper-quiet.

Emitever Dimmer Switch LED Driver 2-in-1
UL Listed & FCC Certified 0.3%–100% Full-Range Dimming No Separate Driver Needed 12V & 24V Models Single-Pole or 3-Way

Why Professionals Choose the 2-in-1

Everything you need for clean, reliable LED dimming β€” packed into a standard wall-box footprint.

πŸ”Œ

Driver + Dimmer in One

Eliminates the separate LED driver. Converts 120VAC directly to 12VDC or 24VDC and dims from a single compact unit β€” saving 80% installation space.

πŸŒ’

0.3%–100% Flicker-Free Dimming

Full-range smooth dimming with zero flicker and zero buzz. Adjustable brightness curves let you tune the feel of every space.

🏠

Single-Pole or 3-Way Wiring

One dimmer works in both Single-Pole and 3-Way setups. Simply pair with a standard 3-Way switch β€” no special traveler dimmer required.

πŸ›‘οΈ

UL Listed & FCC Certified

Full UL/cUL listing, FCC, Class 2, SELV, and RoHS compliance. Built to pass inspection and exceed safety standards on every job.

πŸ“

Slim Fit for Crowded Boxes

Ultra-shallow 1.99–2.04 inch depth slides into standard electrical boxes where bulky driver combos don’t fit. Replaces any standard switch directly.

✨

Premium Glossy White Finish

Sleek modern aesthetic compatible with screwless wallplates. Looks as good as it performs β€” a professional finish every homeowner will love.

See It In Action

Watch how effortlessly the 2-in-1 installs and delivers smooth, silent dimming control.

Dimmer switch wiring diagram

Replace Two Devices With One Wall Switch

Traditional LED setups hide a separate driver in the wall or cabinet and run wires to a remote dimmer β€” messy, failure-prone, and hard to service.

The EMITEVER 2-in-1 lives right in the wall box. Line voltage in, low-voltage DC out, slide to dim. That’s it.

  • Connects directly to standard 120VAC wall box
  • Outputs stable 12VDC or 24VDC to your LED strips
  • Slide up/down for smooth 0.3%–100% brightness control
  • Works with under-cabinet, cove, accent & toe-kick lighting
  • Requires neutral wire in most installations

Built Tough. Certified Safe. Class 2 Rated.

Every EMITEVER 2-in-1 passes the same rigorous testing required by electricians, inspectors, and commercial project managers nationwide.

  • Short-circuit & overload protection built in
  • Over-temperature shutdown safeguard
  • Flame-retardant V-0 housing (UL94 rated)
  • Class 2 rating β€” inherently safe for low-voltage output
  • SELV compliant β€” safe extra-low voltage by design
  • RoHS compliant β€” environmentally responsible materials
UL Listed Emitever Dimmer Safety

Perfect For These Applications

Anywhere you run single-color 12V or 24V DC LED strip lighting at home.

🍳

Under-Cabinet Kitchen

Clean lines, no exposed hardware

πŸ›‹οΈ

Cove & Accent Lighting

Architectural ambiance control

πŸ›οΈ

Bedroom Lighting

Smooth, whisper-quiet dimming

🚿

Bathroom Vanity

Class 2 safe for wet locations

πŸ“š

Display & Shelf Lighting

Retail & gallery applications

Model Specifications

Choose the voltage and wattage that matches your LED strip load.

πŸ’‘ 12V 60W β€” $89.99
Input AC 120V 60Hz
Output 12VDC / 60W
Size 4.13 Γ— 2.12 Γ— 1.99 in
Temp Range –40Β° to 50Β°C
Wiring Single-Pole / 3-Way
πŸ’‘ 12V 120W / CL 120W β€” $129.99
Input AC 120V 60Hz
Output 12VDC / 120W (2Γ—60W)
Size 4.13 Γ— 2.12 Γ— 2.04 in
Temp Range –40Β° to 60Β°C
Wiring Single-Pole / 3-Way
⚑ 24V 60W β€” $89.99
Input AC 120V 60Hz
Output 24VDC / 60W
Size 4.13 Γ— 2.12 Γ— 1.99 in
Temp Range –40Β° to 50Β°C
Wiring Single-Pole / 3-Way
⚑ 24V 96W β€” $99.99
Input AC 120V 60Hz
Output 24VDC / 96W
Size 4.13 Γ— 2.12 Γ— 2.04 in
Temp Range –40Β° to 50Β°C
Wiring Single-Pole / 3-Way
⚑ 24V 160W / CL 160W β€” $144.99
Input AC 120V 60Hz
Output 24VDC / 160W (2Γ—80W)
Size 4.13 Γ— 2.12 Γ— 2.04 in
Temp Range –40Β° to 60Β°C
Wiring Single-Pole / 3-Way
πŸ”’ All Models β€” Shared Specs
Input Voltage 120VAC
Dimming 0.3%–100% Auto-Trim
Flammability V-0 per UL94
Wiring Type Terminal Cap
Certifications UL/cUL, FCC, Class 2
βœ…UL / cUL Listed
πŸ“‘FCC Certified
πŸ”Class 2 Rated
⚑SELV Compliant
🌿RoHS Compliant

Pick Your Model

Match voltage and wattage to your LED strip load. Free shipping on orders over $100.

12V 60W
$89.99
Up to 5m of 12W/m strip
24V 96W
$99.99
Up to 8m of 12W/m strip
12V / 24V 60W
$89.99
Entry wattage, both voltages
12V / 24V 120–160W
From $129.99
Higher load, dual outputs

⚠️ Compatibility Checklist

Confirm these before ordering to make sure it’s the right fit for your project.

βœ… This switch works with:

  • Single-color (2-wire) 12VDC or 24VDC LED strip lights only β€” output voltage must match your strip exactly.
  • Load wattage must not exceed the model’s rated output (60W, 96W, or 160W).
  • Standard 120VAC wall boxes β€” Single-Pole or 3-Way circuits.
  • A neutral wire is required in most installations.

❌ This switch is NOT compatible with:

  • RGB, RGBW, or multi-channel LED strips.
  • Other power supply outputs β€” this unit IS the driver, do not chain it.
  • 12V strips on 24V models or vice versa.

Not sure which model fits your setup? Contact our team before ordering β€” we’ll help you choose the right configuration.

Frequently Asked Questions

Quick answers for installers and homeowners.

Do I still need a separate LED driver?

No. The EMITEVER 2-in-1 replaces your LED driver entirely. It converts 120VAC line voltage directly to 12VDC or 24VDC output and includes full dimming control β€” all in one wall-box unit.

Can I use it in a 3-Way switch circuit?

Yes. Install this dimmer in one location and pair with a standard 3-Way switch at the other end. Only one dimmer per 3-Way circuit is supported.

Will it work with RGB or color-changing strips?

No β€” the 2-in-1 is designed for single-color (2-wire) LED strip lights only. For RGB or RGBW strips, a multi-channel controller is required.

Is a neutral wire required?

Yes, in most standard installations a neutral wire is required. Please verify your wall box has a neutral before ordering.

What’s the difference between the standard and CL models?

The CL variant is designed for use with certain capacitive loads and can improve compatibility in specific wiring environments. If you’re unsure, contact us with your setup details.

Does it work with Lutron or Leviton wall plates?

The unit is compatible with standard screwless wallplates (sold separately). It fits in a standard single-gang box and accepts common wallplate finishes.

Ready to Simplify Your LED Installation?

Join thousands of electricians and DIYers who’ve upgraded to the cleaner, safer, all-in-one solution.

Shop Now β€” From $89.99 Talk to an Expert
βœ“ Free shipping on $100+ βœ“ UL Listed βœ“ Wholesale pricing available βœ“ Expert support