LED strip lights are typically powered by a direct current (DC) power source such as a battery or a power supply/driver. Here are the general steps to power LED strip lights:

1. Determine the voltage requirement. Most LED strip lights operate at 12V or 24V - check the specifications for your specific LED strips. Emitever offers 24V and 48V strip lighting systems.

2. Choose a matching power supply. The power supply should deliver the correct voltage and enough current (amps) to power your strips. You can use our LED System Builder or consult our power calculation guide to determine the correct driver rating.

3. Connect the power supply. Most LED strip lights have a positive and negative wire. Connect positive to positive and negative to negative on the power supply terminals.

4. Test the LED strips. After connecting, switch on the power to confirm the strips are working correctly. If they don't light up, double-check your connections and verify the driver is providing the correct voltage.

5. Add dimming control if needed. Install a dimmer switch or controller to adjust the brightness or color of the LED strip lights. See our dimmable driver range for compatible options.

Always follow the manufacturer's instructions and safety guidelines when working with LED strips and electrical components. If you're unsure about any aspect of the installation process, consult a licensed electrician.