LED Power Supply Sizer (max 300 W per PSU)
Calculates with a 20% safety margin (each PSU used at 80% of nameplate). If load exceeds 300 W per PSU, the tool recommends multiple PSUs.
Assumptions & tips
- For RGB, enter watts/ft per color channel. The tool sizes drivers per channel and multiplies PSU counts by 3.
- Per-PSU cap is fixed at 300 W. Headroom is fixed at 20% (usable = 80% of nameplate).
- Do not parallel DC outputs. Use a shared dimming/control bus if needed.
- Choosing a selection results in a full page refresh.
Designed for lighting installers, designers, and contractors.
LED power systems require proper load calculations and compatible controls. For best results, professional installation is recommended.
!