Knowledge Hub • LED System Planning
LED System Builder: Find the Right Strip, Driver, and Accessories in Minutes
Planning an LED strip lighting project can get confusing fast. The Emitever LED System Builder helps you choose compatible strips, drivers, dimmers, connectors, and accessories based on your project.
Build a Complete LED Lighting System with Less Guesswork
Answer a few questions about your installation and receive a recommended LED system with calculated power requirements, compatible components, and a ready-to-review parts list.
Start LED System Builder Shop All ProductsWhat Is the LED System Builder?
The LED System Builder is a guided planning tool that helps match your project with compatible LED strips, drivers, dimming options, connectors, and accessories.
Instead of manually comparing specifications or calculating power requirements by hand, the builder asks simple questions about your project and generates a complete system recommendation.
What Can the Builder Help With?
Choose between COB and SMD LED strip options based on your project type.
Estimate required wattage and driver sizing based on total run length.
Select wall dimmers, smart controls, 0-10V systems, or simple on/off switching.
How the LED System Builder Works
Step 1: Select Your Project Type
Choose the application that best matches your installation, such as under-cabinet lighting, cove lighting, outdoor lighting, display lighting, or long-run lighting.
Step 2: Define Your Layout
Tell the builder whether your project is one continuous lighting zone, multiple separated sections, or repeated identical kits.
Step 3: Enter Run Length
Enter the length of your LED strip run. The builder uses this to calculate strip quantity, power requirements, and driver recommendations.
Step 4: Choose Strip Type
Select a seamless COB strip for smooth, dot-free lighting or a standard SMD strip for cost-effective general lighting and longer commercial runs.
Step 5: Select Color Temperature
Choose from warm, neutral, or cool white options depending on the look and purpose of the space.
Step 6: Choose Power Supply Options
The builder can recommend a compatible driver, or you can use your own existing power supply if it matches the system requirements.
Step 7: Pick a Control Method
Select how the lights will be controlled, including wall dimmers, smart controls, 0-10V systems, owner-supplied controls, or simple switched operation.
Step 8: Add Connectors if Needed
If your strip needs to turn corners, reconnect sections, or bridge gaps, the builder can recommend compatible connector accessories.
Why Use the LED System Builder?
For Homeowners and DIY Projects
- Helps choose the right strip and power supply
- Reduces confusion around voltage and wattage
- Creates a simple recommended parts list
- Useful for under-cabinet, shelf, accent, and room lighting
For Contractors and Installers
- Speeds up project planning
- Helps size drivers and estimate material quantities
- Supports multiple project types and long-run systems
- Generates a project recommendation that can be reviewed or exported
24V vs 48V: Which Should You Choose?
For most LED strip lighting projects, 24V is the recommended choice. It offers a strong balance of performance, compatibility, and product availability for residential and commercial installations.
For longer installations, 48V may be the better choice. Higher voltage can help reduce voltage drop, support longer run lengths, and provide higher output when additional brightness is needed.
The LED System Builder recommends 24V or 48V based on your selected project type and run length, so you do not have to guess.
What About RGB or Plug-and-Play Kits?
The LED System Builder is primarily designed for white-light architectural, residential, and commercial LED strip systems.
If you want color-changing RGB lighting or a simpler all-in-one solution, Emitever also offers plug-and-play LED kits that include power supplies, controllers, remotes, and accessories in one package.
Frequently Asked Questions
- Do I need electrical experience to use the builder?
- No. The builder is designed to guide both homeowners and professionals through the planning process. ```
- Can I cut and reconnect LED strip lights?
- Yes. Most LED strips can be cut at designated cut points and reconnected using compatible connectors, jumpers, or wiring methods.
- Can multiple LED strip sections use one driver?
- Yes, as long as the combined wattage does not exceed the driver's capacity and all connected strips use the same voltage.
- Does the builder calculate driver size?
- Yes. When driver selection is included, the builder estimates required wattage and recommends compatible driver options.
- Can I use my own dimmer or control system?
- Yes. The builder includes owner-supplied control options and can help identify compatible solutions when available. ```
Build Your LED System Today
Whether you're planning under-cabinet lighting, architectural accents, retail displays, or a larger commercial installation, the Emitever LED System Builder helps simplify the process.
Answer a few questions, review your recommended system, and build with confidence.
Start LED System Builder Browse Products
